Linde Werdelin 3-Timer

Linde Werdelin 3-Timer strap sizes, reference by reference.

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line6 references
Illustration drawn to scale: 44 mm case, lug width not on record

No photo of the Linde Werdelin 3-Timer yet. Do you own one? Share a photo

The story · Since 2009

The story of the Linde Werdelin 3-Timer

Linde Werdelin built the 3-Timer so one wrist could read three time zones. Its case has ears that once docked digital instruments, and four hex screws at each corner let the owner swap straps.

300 m

water resistance stated for the Sunset Collection and the 2018 Midnight

Read the full storyHide the story
300 mwater resistance stated for the Sunset Collection and the 2018 Midnight
42 hours42 hours: power reserve in the Sunset Collection
33pieces in most 3-Timer runs from 2017 to 2019
44 mm by 46 mmcase size given for the 2018 Midnight and the 2022 Sunset Collection

Chapters

  1. 2009

    Basel debut with a 24-hour bezel

    The 3-Timer first appeared at Basel in March 2009. Its textured dial and GMT hand gave the owner a second and a third time zone.

  2. 2017 to 2019

    Runs of 33 pieces

    Relaunches came in short runs, starting with the Kristian Haagen edition in 2017. Midnight and Ocean followed in 2018, and Rock and Rock Gold in 2019.

  3. 2020

    The sandblasted Nord

    The Nord had a sandblasted case and a blue fumé dial. Linde Werdelin made only 55 of them, and the watch shipped with a rubber strap.

  4. 2022

    The last 3-Timers

    The Sunset Collection came in four colours and marked the close of the 3-Timer line. Each watch shipped on a rubber strap matching its dial.

Moments

2022. The brand called the Sunset Collection the last of the 3-Timers. Founder Jorn Werdelin said the brand was saying goodbye to the model.

2017. Linde Werdelin asked Kristian Haagen, a long-time fan, to make a watch with them. They chose the 3-Timer and produced 33 olive pieces.

Designed by

Kristian Haagenco-designer2017

Linde Werdelin asked Haagen, a long-time fan of the brand, to create a watch with them. He and Morten Linde chose the olive dial and matching strap for the 2017 edition.

Generations and strap changes

  1. 2022
    Sunset Collection

    Four colourways closed the line. The 44 mm by 46 mm stainless steel case houses an ETA 2893 automatic movement.

    Rubber straps in the same colour as each dial.

  2. 2020
    Nord

    A sandblasted case with a blue fumé dial, limited to 55 pieces.

    Midnight Blue rubber strap; a steel bracelet or textile strap can be fitted.

  3. 2018
    Midnight and Ocean

    Midnight and Ocean were two blue dials, each limited to 33 pieces. The two blues differ, the Midnight being the darker one.

    Midnight: textured calfskin and rubber. Ocean: blue rubber only.

  4. 2017
    Kristian Haagen edition

    The Haagen edition came in olive green, a colour the brand chose with its fan Kristian Haagen, and was limited to 33 pieces.

    Textile-printed calfskin strap in olive.

6 Linde Werdelin 3-Timer references

Linde Werdelin 3-Timer references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • 3 Timer Sunset collection (four colours incl. pink and orange)

    Lug width: Proprietary strap system

    Source: Listed

    Case size: 44 mmFour candy colours (pink, flame orange, others not named) dialCase material: Stainless steel

  • 3‑Timer Chocolate

    Lug width: Proprietary strap system

    Source: Listed

    Brown dialCase material: Brown-gold DLC case

  • 3‑Timer Kristian Haagen edition

    Lug width: Proprietary strap system

    Source: Listed

    Brown dial

  • 3‑Timer Midnight

    Lug width: Proprietary strap system

    Source: Listed

    Dark blue dial

  • 3‑Timer Nord

    Lug width: Integrated bracelet

    Source: Listed

    Case size: 44 mmBlue fumé dialCase material: Stainless steel (sandblasted)

    Attachment
    integrated
    Status
    Listed in our database, not yet verified
  • 3‑Timer Ocean

    Lug width: Proprietary strap system

    Source: Listed

    Blue dial

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the 3-Timer take?

They describe ears and screw points on the case, and the straps change by a screw system, so check the fitting before you buy a strap.

How water resistant is it?

The maker and the 2018 Fratello review both give 300 metres.

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.